Altonika - development and manufacture of automotive and industrial electronics, radio channel security systems, medical equipment and radio communications.

 TAVR does not require connection to the electrical network in protected premises (runs on batteries). The system is designed for user’s self-installation.

TAVR includes two devices: control panel and GSM-module. Connection between them is carried out via radio channel. When motion sensor triggers, which is located on the control panel, alarm signal is transmitted to hidden installed GSM-module that will call and send SMS-message to specific phone numbers. In case of alarm the owner by calling the system, will have the opportunity to attend the premises. In addition, the system sends SMS-messages with an increase in temperature up to +60 °C inside the protected premises (fire risk) and on the need to replace the batteries. Arming and disarming is carried out by using Touch Memory keys stored in system. The reader is located on the control panel.

Control panel

• Built-in motion sensor: detection area 5х5 m
• Arming and disarming using Touch Memory keys (up to 8 keys)
• Supply voltage: 4.5 V (alkaline or lithium batteries of type АА, 3 pcs.)
• Operation time from a set of batteries: up to 1 year
• Built-in temperature sensor
• Operating temperature range: from -20 to +40°С
• Intermittent (not more than 1 minutes) to +60°С
• Dimensions: 120 х 68 х 23 mm

GSM-module

• Frequency GSM: 900/1800 MHz
• Supply voltage: 6 V (non-rechargeable batteries of type С, 4 pcs.)
• Built-in microphone
• Built-in temperature sensor
• Operating temperature range: from -20 to +40°С
• intermittently (not more than 1 minutes) to +60°С
• Operation time from a set of batteries: up to 1 year
• Dimensions: 120 х 128 х 36 mm